![]() The additional mini-GBIC slots supports SFP auto-detection, meaning the administrator now can flexibly choose the suitable SFP transceiver according to the transmission distance to extend the network efficiently. ![]() SFP Design for Flexible Distance Extension LLR means when a device connected to the converter and the fiber line loses the link, the converter’s fiber port will disconnect the link of transmission.LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber port will disconnect the link of transmission.The LFP function includes Link Loss Carry Forward (LLCF) and Link Loss Return (LLR), both of which can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. LK8002P1C1F provides auto MDI/MDI-X on its TP port and built-in Link Fault Pass-through function (LFP). They will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden. Once the PD stops working and responding, the switch will resume the PoE port power and bring the PD back to work. The LK8002P1C1F can be configured to monitor connected PD status in real time. The special and convenient power system of the LK8002P1C1F supports dual48~56V DC power inputs for power redundancy and operational flexibility. Its 1000 BASE-X fiber optic uplink port provides long distance, high speed and stable data transmission to a remote core network. It can be used in standalone applications, or Rack-Mounted applications where multiple media converters can be inserted into a rack-mount chassis (up to 16 units), and allowing all the converters to be powered by a single internal power supply.LK8002P1C1F is an Industrial Gigabit Media Converter, which combines Ethernet media conversion (from 1000BASE-X to 10/100/1000BASE-T) with 802.3at Power over Ethernet injector function to deliver up to 30 watts of power output and high data transmission speed to PDs (powered devices) installed in a remote area where sufficient and reliable power input is required. It is compact, cost-effective, low dissipative, high reliable and stable. It can be configured automatically for Full Duplex or Half Duplex operation. Six LED indicators are built-in for easy diagnosing and monitoring the status of power, Unshielded Twisted Paired (UTP) Link, UTP Activity, Fiber Link, Fiber Activity, Full duplex and data rates. The Converter is equipped with single fiber optic connectors (One for transmitting-TX and another for receiving-RX) and one RJ-45 Jack and one external pwer supply receptacle. ![]() The data signal converted by such high performance media converter can be transmitted up to 20km maximum by fiber-optical cable. It supports 10/100/1000Base-T and 1000Base-LX applications. It is designed to convert data signal between 10/100/1000Base-T and 1000Base-LX Gigabit Ethernet. The Media Converter complies with IEEE 802.3z, IEEE 802.3AB Standards. This Networx® Fiber Media Converter is classified as Power Sourcing Equipment (PSE) which combine data transfer over a fiber link and providing power to a Powered Device (PD) over CAT5e/CAT6 UTP Cable (Maximum length of 100 meters.)
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |